Connector Nut

Here are Todays Amazing Connector Nut Deals

More Great Information on Connector Nut:

How you can Set up E3 FLASHER On Slim PS3 by ella

First, we need prepare subsequent item:

1 PS3 which can downgrade to 3.55

E3 FLASHER Limited edition with 8 accessory. (it'll consist of universal screwer)

SLIM disassemble tutorial

1: Remove the four hexagon nut below the cover of PS3 bottom.

2: take out nut around the High definition, and obtain out hardisk .

3: Remove the seal, and consider off all nuts

4: open Top cover

5: Consider off the nuts beside power, and unplug power cable besides power, consider out powe Module.

6: Remove the black nut around the correct of 220V energy cable and also the nuts around the top of BD driver, make sure you be aware the big and small size, particularly the nut on driver is big, don't combined when re-install.

7: Unplug all BD driver information cable

make sure you be aware there has a data cable below the driver , becareful unplug it.

8: Unplug the front buttom board prior to take out BD driver. Please be aware only disconnect with console, no require consider out, because there has cable hyperlink to mainboard.And then cable take out BD DRIVER.

9: Unplug antenna, and remove from mainboard track, no need disconnect steel of antenna, and unplug the front board along with cable.

10: You'll need consider off four white nuts before take out mainboard.(white nut is fixed for Hd)And then can consider out mainboard

eleven: Eliminate all nuts from steel shade around the back of mainboard,Consider out Metal shade,SLIM console solder tutorial: following testing stage showes the solder assortment.

E3 FLASHER offer gentle board unique for SLIM console, you are able to install quicker with the testing point, no need any diagramme, and 100% secure without any problem.

Solder sequence Solder SBCE stage first, and solder SBE to fix soft board. If you can watch all testing point in front it means right location. And then solder VCC BVCC GND and so on, please note those point require heat small more time due to mainboard technologies. After which solder other stage. Recommend solder posture :Incidentally, to repair soft board, you are able to use double-side tape as image showes, and stick on mainboard.Finished

SLIM console remout tutorial Now we need connect mainboard which installed gentle board well to console once more.

1: We want remout steel shade to mainboard, make sure you be aware gentle board require location into High definition warehouse.

After set up metal shade correctly

Additionally, for correctly solder , you can test with E3 FLASHER mainboard, examine installation testing tutorial

2: Location mainboard into case, please be aware soft board require across High definition warehouse of situation first, to stop harm soft board, and then location white and black nuts properly, and install anternna correctly.

Location mainboard into situation

2: Set up buttom board and BD generate.

The buttom board require link cable first, and don't install on situation simply because you'll need install drive initial

Install buttom board and BD generate,you'll need link cable initial in the bottom of generate , press connector carefully.And link external cable,Then install BD drive and an additional nut.At last set up buttom board on mainboard,install buttom board on mainboard.

3: Set up power moduel, make sure you set up the two nut well after which set up energy cable

4: After close the very best cover, you need set up all nuts which at the bottom (not include nut on Hd warehouse)

set up all nuts which in the bottom (not include nut on Hd warehouse)

5: Install E3 flasher mainboard ,the mainboard placed within the special metal shade

Set up E3 flasher mainboard

Put it into High definition warehouse , much like install Hd

After which ducked the connector on gentle board into mainboard socket, you are able to press from left to right with finger. You will hear distinct sound from connector in the event you connect properly.

And then ducked the connector on gentle board into mainboard socket

Install properly

Push mainboard into Hd warehouse, becareful otherwise it will damage connector of SATA , or not link corretly.Then, set up E3 FLASHER cover board into mainboard, do not mistake the location.set up E3 FLASHER cover board into mainboard.Finally install nut of High definition warehouse

If all is correct, you'll see LED lights following connect ps3 power (no require start PS3)

Finally, connect ESATA station, place original PS3 Hd into esata station and setting buttom on COVER BOARD to PS3 MODE, OFW. the High definition switching sequence is : turn off PS3-turn off esata station power-unplug PS3 energy cable-place High definition to esata station-plug ESATA cable to ps3- plug PS3 power cable-power on esata station?turn on ps3. If can turn on ps3 properly, congratulate you are successful !

More info you are able to visit the site fyygame.com, if you would like to purchase cheap E3 Flasher or PS3 controller,I thank fyygame is the best select to save lots of your cash.

PS3 controller

E3 Flasher

Gmate
halloween gift

Article Source: http://www.earticlesonline.com/Article/How-you-can-Set-up-E3-FLASHER-On-Slim-PS3/1220446

I installed a 3,8x1,2flood safe lines . when I turned the shut valve on the line blew off ast the line end. T

The flood safe line blew off when Shut Off valve was opened. connector nut was not over the snap ring. what a mess . Water everywhere.

If you used the pliers to tighten the connections , they will get damaged and from what you describing that's what happened. They are to be hand tightened only, unlike regular connectors. I had my father in law(man never reads the instructions) install those for me and he just killed them.